7
B
attery installation (for power backup)
You can insert 8 AA (LR6) batteries (not supplied) into the base to temporarily power the camera in the event of
a power failure�
Important:
•
Use only alkaline batteries.
•
Do NOT use manganese‚ Ni-Cd‚ Ni-MH‚ lithium‚ or lithium ion batteries.
•
Confirm correct polarities (
‚ ).
•
Disconnect the AC adaptor when inserting or replacing batteries.
•
Batteries are only intended for short-term use.
1
Remove the base cover from
the base�
2
Install the batteries in the
battery holder�
3
Attach the base cover to the
base�
Note:
•
The HomeHawk app notifies you when the battery power is low. In this case‚ remove and replace all of the
batteries with new ones�
HNC850_ITG_(en-en)_0208_ver.070.pdf 7
2019/02/08 17:02:23