Registering other devices
to the hub
This procedure is not required for devices
that were included as part of a bundle.
Before you can use devices such as cameras,
sensors, and smart plugs, they must be
registered to the hub.
If you purchased devices separately (i.e., not
as part of a bundle), you must register each
device to the hub.
You can register each device by using the
registration buttons or the
[Home Network]
app.
Using registration buttons
1
Hub:
Press and hold the registration button
until the LED indicator blinks in green.
R
Press and hold the appropriate
registration button (page 11) according
to the device you want to register.
M
HANDSET/LOCATOR
N
: For
handsets
M
CAMERA
N
: For cameras
M
OTHER DEVICE
N
: For other
devices
2
Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the device’s registration
button until the device’s LED indicator
blinks in green.
R
When registration is complete, the hub
sounds one long beep.
Note:
R
If registration fails, the hub sounds several
short beeps.
R
To register a mobile device, use the
procedure described on page 15.
Using the app
1
Start the
[Home Network]
app.
2
From the
[Home Network]
app home
screen, tap
[Settings]
.
3
Tap
[Device Registration]
.
4
Tap
[Registration]
.
5
Select the type of device that you want to
register.
6
Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the registration button on
the device you want to register until the
device’s LED indicator blinks in green.
R
When registration is complete, the hub
sounds one long beep.
Note:
R
If registration fails, the hub sounds several
short beeps.
16
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Setup
HNB600E_(en_en)_0421_ver.060.pdf 16
2015/04/21 14:13:15
