KX
‐
HDV430
Software
File
Version
02.100
or
later
1. 4.2.2 Network Status
Change the followings in "
Setting Mode
" on page 61.
(Before)
Value Range
(After)
Value Range
2. 4.3.2 Ethernet Port Settings
Add the following WEB setting.
Enable CDP
Description
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference
3. 4.6.1 Call Control
Add the following WEB setting.
Group Call Pickup
Description
Value Range
Default Value
Configuration File Reference
Barge in
Description
Value Range
Default Value
Configuration File Reference
Specifies the feature number for performing group call pickup.
0–4 digits (0–9, *, #)
Not stored.
NUM_PLAN_PICKUP_GROUP
Specifies the feature number for performing barging in.
0–4 digits (0–9, *, #)
Specifies the interval, in seconds, between sending CDP frames.
1 - 3600
30
CDP_INTERVAL
• Disable
• LLDP
• Manual
• Disable
• LLDP
• CDP
• LLDP/CDP
• Manual
Selects whether to enable the CDP feature.
・Yes
・No
No
CDP_ENABLE
Not stored.
NUM_PLAN_BARGE_IN
