KX
‐
HDV430
Software
File
Version
03.000
or
later
1. 4.5.4 VoIP Settings [Line 1]–[Line 12]
Change the Value Range in "
SRTP Mode
" on page 117.
(Before)
Value Range
(After)
Value Range
2. 4.6.1 Call Control
Add the following WEB setting.
Missed Call Notification - Message
Description
Value Range
Default Value
Configuration File Reference
Missed Call Notification - LED
Description
Value Range
Default Value
Configuration File Reference
Voice Message Notification - Message
Description
Value Range
Default Value
Configuration File Reference
NOTIFY_MISSEDCALL_LED_ENABLE
Selects whether to display 'Voice MSG' on the screen in standby mode.
・Yes
・No
Yes
NOTIFY_VOICEMAIL_ENABLE
・SRTP
・RTP/SRTP
Note
• SRTP: Use only SRTP for outgoing and incoming calls.
• RTP/SRTP: Use only RTP for outgoing calls, and RTP or
SRTP for incoming calls.
・0:SRTP
・1:RTP/SRTP
・2:Panasonic Original
・3:SRTP/RTP
Note
• 0: Use only SRTP for outgoing and incoming calls.
• 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.
• 2: Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a Panasonic PBX.
"SRTP_MIX_TRANSFER_ENABLE_n" mustalso be set to "Y".
• 3: If you are using "RTP/AVP" and append "a=crypto", and the response
message includes "a=crypto", the conversation will be established
with SRTP. If "a=crypto" is not included, the conversation will be
established with RTP.
Selects whether to display 'Missed calls' on the screen in standby mode.
・Yes
・No
Yes
NOTIFY_MISSEDCALL_ENABLE
Selects whether the LED is used to indicate a missed call
・Yes
・No
Yes
