manualshive.com logo in svg

Panasonic KX-HDV430, Administrator'S Manual

Share
Download
Panasonic KX-HDV430 Administrator'S Manual Download Page 2

Introduction

Outline

This Administrator Guide provides detailed information on the configuration and management of this unit.

Audience

This Administrator Guide contains explanations about the installation, maintenance, and management of the
unit and is aimed at network administrators and phone system dealers.
Technical descriptions are included in this guide. Prior knowledge of networking and VoIP (Voice over
Internet Protocol) is required.

Related Documentation

Quick Start Guide

Briefly describes basic information about the installation of the unit.

Operating Instructions

Describes information about the installation and operation of the unit.

 
Manuals and supporting information are provided on the Panasonic Web site at:
http://www.panasonic.net/pcc/support/sipphone/

Technical Support

When technical support is required, contact your phone system dealer/service provider.

Trademarks

•

Microsoft, Excel, Internet Explorer, Outlook, and Windows are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.

•

Firefox is a registered trademark of the Mozilla Foundation.

•

Google Chrome is a registered trademark of Google Inc.

•

All other trademarks identified herein are the property of their respective owners.

•

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

NOTES

•

The screen shots shown in this guide are provided for reference only, and may differ from the screens
displayed on your PC.

Introduction

2

Administrator Guide

Document Version 2016-05

Summary of Contents for KX-HDV430

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands