Panasonic KX-HDV130X Page 22 Operating Instructions Manual Download

Page: 22 / 76

Main Menu

Press

Menu

to display the following main menu.

Call Center

Used to access the Call Center feature.

Presence

Used to access the Presence feature.

Fwd/DND

Sets the Call Forwarding or Do Not Disturb features.
See “Call Forwarding/Do Not Disturb”, Page 35.

Paging

Makes a Multicast Voice Paging call.
See “Making a Multicast Voice Paging call”, Page 29.

New Phonebook

Adds a new entry into the local phonebook.
See “Storing an Item in the Local Phonebook”, Page 37.

Incoming Log

Used to display the incoming call log.
See “Incoming/Outgoing Call Log”, Page 23.

Outgoing Log

Used to display the outgoing call log.
See “Incoming/Outgoing Call Log”, Page 23.

Phonebook

Used to access the local or remote phonebook.
See “Using the Phonebook”, Page 36.

ECO Mode

Sets the ECO mode feature.
See “ECO Mode”, Page 43.

Basic Settings

Used to access the basic settings menu.
See “Changing the Basic Settings”, Page 47.

System Settings

Used to access the system settings menu.
See “Changing the System Settings”, Page 48.

Application

Used to access the Application feature.
*1 This item is displayed only when the feature is enabled. Contact your administrator for further

information.

Before Operating the Telephones

Summary of Contents for KX-HDV130X













































































Search results

Summary of Contents for KX-HDV130X

Reviews:

Related manuals for KX-HDV130X

Brands by name

Popular brands

Panasonic KX-HDV130X, Operating Instructions Manual

Search results

Summary of Contents for KX-HDV130X

Reviews:

Related manuals for KX-HDV130X

Brands by name

Popular brands