Panasonic KX-HDV130B Page 7 Operating Instructions Manual Download | Manualshive

Page: 7 / 76

background image

television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO EMERGENCY
NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities during off-peak hours, such as early morning or late evening.

CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this product.

Hearing Aid Compatibility

This telephone provides magnetic coupling for hearing aids as defined by the FCC in 47 CFR Section
68.316. Use only handsets or other acoustic devices with this equipment that are compliant with the
hearing aid compatibility requirements of FCC Part 68.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are
not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional
headset accessory or the speakerphone option (if applicable) when using this phone. Consult your
audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate
shielding to RF energy commonly emitted by digital devices.

Compliance with TIA-1083 standard:

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephone handsets identified with
this logo have reduced noise and
interference when used with T-Coil
equipped hearing aids and cochlear
implants.

Responsible Party

Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490

Technical Support

Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Telephone: 1-800-211-PANA (7262)

7

Important Information

«
...
5
6
7
8
9
...
»

Summary of Contents for KX-HDV130B













































































Reviews:

No comments

Related manuals for KX-HDV130B

Brand: Octopus Pages: 122

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 115

Brand: Panasonic Pages: 22

GLOBARANGE BB-GT1500E

Brand: Panasonic Pages: 10

Brand: Yealink Pages: 48

Brand: Yealink Pages: 2

T46S Skype for Business

Brand: Yealink Pages: 3

Brand: YAKOYA Pages: 25

Brand: Getek Pages: 6

Brand: GE Pages: 46

Brand: BT Pages: 69

PhoneEasy 331ph

Brand: Doro Pages: 2

Brand: invotel Pages: 2

Brand: OGATECH Pages: 144

TerryPhone TP-02

Brand: ACENIS Pages: 11

Brand: Overmax Pages: 16

Brand: TechMatte Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands