Panasonic KX-FT21RS, Serivce Manual

Page: 76 / 166

2.4.4. SERVICE FUNCTION TABLE
Code Function Set Value Effective Range Default Remarks
501 Setting the pause time 001~600 × 100 msec 001~600 05000 msec Selects the pause time in 100 msec steps.
502 Setting the flash recall time 01~99 × 10 msec 01~99 700 msec Selects the line break time during flashing in
10 msec steps.
503 Setting the pulse dial
speed 1:10pps 2:20pps 1, 2 10 pps Sets the pulse dial speed.
520 Setting the CED frequency 1:2100Hz 2:1100Hz 1, 2 2100 Hz When international communications cannot be
performed smoothly, select 1100 Hz.
521 Setting the international
line mode 1:ON 2:OFF 1, 2 ON Selects the international line mode during FAX
communication.
522 Setting the return to default
mode 1:ON 2:OFF 1, 2 ON Sets the resolution and contrast conditions for
FAX or copy to the default settings.
523 Setting the reception
equalizer 1:ON 2:OFF 1, 2 OFF When the telephone station is far from the
unit or sending cannot be performed correctly,
set to "ON".
524 Setting the sending
equalizer 1:ON 2:OFF 1, 2 OFF When the telephone station is far from the
unit or sending cannot be performed correctly,
set to "ON".
544 Selecting the document
feed position 01~99 step 00~99 ----- When the ADF function is incorrect, adjust the
feed position. (8 step = 1mm)
550 Memory clear Press "START/COPY/SET".
551 ROM version and sum check Press "START/COPY/SET".
553 Setting the FAX monitor
function 1:OFF
2:PHASE B
3:ALL 1, 2, 3 OFF Sets whether to monitor the line signal with
the unit´s speaker during FAX communication
or not.
554 Modem test Press "START".
555 Scanner test Press "START".
556 Motor test Press "START".
557 LED test Press "START".
558 LCD test Press "START".
559 Setting the document jam
detection 1:ON 2:OFF 1, 2 ON See 2.2. USER RECOVERABLE ERRORS.
561 KEY test Press any key.
563 CCD position adjustment
value set 01~30 × 1 mm 00~30 ----- Lets you select the correction value for the
scanner to align the image.
570 Setting the % break 1:61% 2:67% 1, 2 61% Sets the % break of pulse dialing.
571 Setting the number of
times that ITS is redialed 00~99 00~99 14 times Selects the number of times that ITS is
redialed (not including the first dial).
572 Setting the ITS redial
interval 001~999 sec 001~999 030 sec Sets the interval of ITS redialing.
573 Setting of number of time
that REMOTE TURN ON
BELL sound 01~99 01~99 15 times Sets the number of times that the unit starts
to receive a document in the TEL mode.
590 Setting the number of FAX
redial times 00~99 00~99 5 times Selects the number of redial times during FAX
communication (not including the first dial).
591 Setting the FAX redial
interval 001~999 sec 001~999 045 sec Sets the FAX redial interval during FAX
communication.
592 Designation of CNG
sending 1:OFF
2:ALL
3:AUTO 1, 2, 3 ALL Lets you select the CNG output during FAX
transmission.
ALL: CNG is output at phase A.
AUTO: CNG is output only when
automatic dialing is
performed.
OFF: CNG is not output at phase A.
593 Setting the interval
between CED and the 300
bps signal 1:75 msec
2:500 msec
3:1000 msec 1, 2, 3 75 msec Sets the interval between the CED signal and
subsequent 300 bps signal.
594 Setting the overseas DIS
detection 1: Detects on the 1st
time.
2: Detects on the 2nd
time. 1, 2 Detects on
the1st time.
Sets the recognition format of the DIS signal.
1:Detects the first DIS signal sent from the
receiver during FAX transmission.
2:Ignores the first DIS signal sent from the
receiver during FAX transmission.
595 Setting an acceptable
reception error value 001~999 × number of
times 001~999 100 Sets the number of acceptable error lines
when the FAX reconstructs the received data.
596 Setting the transmit level - 15~00 - 15~00 - 10 dBm Selects the FAX transmission level. (Increase
the level when the telephone line condition is
poor.)
598 Modem sensitivity 20~48 45 See 2.3.4.2.1. Defective facsimile section.
717 Transmit speed select 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 9600 BPS Adjusts the speed to start training during FAX
transmission.
76
KX-FT21RS