Panasonic KX-FP711CX Operating Instructions Manual Download Page 47

Page: 47 / 56

9. Maintenance

Cleaning

9.3 Document feeder/scanner
glass cleaning

Clean the document feeder/scanner glass when:
–

Documents frequently misfeed.

–

Smudges or black/white lines appear on the original
document when sending or copying.

Disconnect the power cord and the telephone line
cord.

Open the front cover by pulling up the centre part.

Clean the document feeder rollers (

) and rubber

flap (

) with a cloth moistened with isopropyl

rubbing alcohol, and let all parts dry thoroughly.
Clean the scanner glass (

) with a soft, dry cloth.

Caution:

Do not use paper products, such as paper
towels or tissues.

Close the front cover securely.

Insert the recording paper gently (page 12).

Connect the power cord and the telephone line cord.

FP701FX-PFQX2792ZA-en.book Page 47 Friday, July 13, 2007 3:34 PM

Summary of Contents for KX-FP711CX

























































Search results

Summary of Contents for KX-FP711CX

Reviews:

Related manuals for KX-FP711CX

Brands by name

Popular brands

Panasonic KX-FP711CX, Operating Instructions Manual

Search results

Summary of Contents for KX-FP711CX

Reviews:

Related manuals for KX-FP711CX

Brands by name

Popular brands