59
KX-FP215
Note:
The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.
10.1. DTMF Signal Tone Transmit Selection
When set to ON (=1), the 12 keys and transmission fre-
quencies are as shown.
When set to OFF (=2), the 12 keys and transmission fre-
quencies are as shown.
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialing in DTMF signal will not work.
SENSOR CHECK &
VOX CHECK
Service Mode
“8” “1” “5”
If you enter this mode and operate sensor levers with your hands, the LCD dis-
play of the related sensor (or switch) turns ON / OFF. Also, when copying a docu-
ment, the related sensor will turn ON / OFF. (Do, Sn, Co, Mo, Pt, Ri, Vx)
For each sensor’s operation, refer to
Do Sn Co Mo Pt Ri Vx : LCD DISPLAY
Do: Document set sensor
:Turns on when the front cover us opened and a document is inserted.
Sn: Read position sensor.
:Turned on when the front cover is opened and starts to read a document.
Co: Cover open sensor
:Turned off when the cover is opened.
Mo: Motor home position sensor
:A home position detection sensor that is used when shifting the motor mode.
Pt: Paper top sensor
:Turned on when the cover is opened and detects a recording paper on the
right side end.
Ri: Film sensor
:Turned off when the film are run out.
Vx: Vox signal
:Detection signal for the tone on the line. Turns on when there is a tone signal
on the line.
• Press
[STOP]
button to quit.
-----
DIGITAL SPEAKER-
PHONE RX & TX
CHECK
Service Mode
“8” “4” “1”
Please refer to
SP-PHONE
PRINT TEST
PATTERN
Service Mode
“8” “5” “2”
Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See
-----
Test Mode
Type of Mode
Code
Function
Operation after code
input
key
High Frequency (Hz)
key
Low Frequency (Hz)
“1”
697
“5”
1209
“2”
770
“6”
1336
“3”
852
“7”
1477
“4”
941
“8”
1633
High (Hz)
1209
1336
1477
Low (Hz)
697
“1”
“2”
“3”
770
“4”
“5”
“6”
852
“7”
“8”
“9”
941
“
”
“0”
“#”
Summary of Contents for KX-FP215
