Panasonic KX-FP207FX-S, Service Manual

Page: 74 / 232

74
KX-FP207FX-S/FP218FX-S
• When making a copy, the document being stored exceeded
the memory capacity of the unit. Press [STOP] to clear the
message. Divide the document into sections.
• There is no room left in memory to record voice messages.
Erase unnecessary messages.
• There is something wrong with the unit’s modem.
(Refer to Test Mode (P.58) and Digital Board Section
(P.116).)
• Your TAM/FAX greeting message is not recorded. Record a
message.
• The voice guidance feature is set to off. Activate feature #47
on P.98. Prerecorded greeting message will be adopted.
• The other party’s fax machine is busy or has run out of
recording paper. Try again.
• Please use genuine Panasonic replacement film.
(Refer to Optional Accessories (P.9).)
• The ink film is slack. Tighten it (See step 5 on Installing the
Ink Film (P.53)).
• The fax machine is positioned near appliances such as TVs
or speakers which generate an intense magnetic field.
• A recording paper jam occurred. Remove the jammed paper.
(Refer to Recording Paper Jams (P.172).)
• You forced the recording paper into the paper tray too
strongly. Remove all of the installed paper, and re-install it
gently.
• There is no space to store new items in the phonebook.
Erase unnecessary items.
• The unit is checking that there is no slack or crease in the ink
film. Wait for a moment while the check is completed.
• The other party’s fax machine does not offer the polling func-
tion. Check with the other party.
• The greeting message or memo message you recorded was
under 1 second long. Record a longer message.
• The other party’s fax machine is busy or has run out of
recording paper. Try again.
• The document is jammed. Remove the jammed document.
(Refer to Document Jams - sending (P.173).)
• Press [STOP] to eject the jammed paper.
• A transmission error occurred. Try again.
• If you send a fax overseas, try the following:
—Use the overseas transmission mode (feature #23 on Pro-
gram Mode Table (P.98)).
—Add 2 pauses at the end of the telephone number or dial
manually.
• The unit is too hot. Stop using the unit for a while and let the
unit cool down.