Panasonic KX-FM220 Operating Instructions Manual Download

Page: 25 / 112

Quick Start

tio

For Assistance, Call 1-800-435-7329

Pre-recorded greeting messages

The unit has pre-recorded greeting messages. According to the situation, one of the following messages will
be played to the caller.

When you do not record your own greeting message (page 43), the following message will be
played.

Hello! We are unable to answer right now.
To send a fax, please start transmission.
To leave a voice message, please speak after the beep.
Thank you.

When the unit detects a problem, one of the following pre-recorded greeting messages will be
played.

MESSAGE FULL

MESSAGE FULL
and
FAX MEMORY FULL

Hello! We are unable to answer right now.
Please try again later.
Thank you.

Hello! We are unable to answer right now.
To send a fax, please start transmission.
To leave a voice message, please try again later.
Thank you.

Note:

If you erase your own greeting messages, the pre-recorded greeting messages will play automatically.

FAX MEMORY FULL

Hello! We are unable to answer right now.
To send a fax, please try again later.
To leave a voice message, please speak after the beep.
Thank you.

Summary of Contents for KX-FM220

















































































































Search results

Summary of Contents for KX-FM220

Reviews:

Related manuals for KX-FM220

Brands by name

Popular brands

Panasonic KX-FM220, Operating Instructions Manual

Search results

Summary of Contents for KX-FM220

Reviews:

Related manuals for KX-FM220

Brands by name

Popular brands