Panasonic KX-FLM661 Operating Instructions Manual Download Page 17

Page: 17 / 92

2. Preparation

For assistance, please visit http://www.panasonic.com/help

2 Preparation

2For assistance, please visit http://www.panasonic.com/help

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

*1 KX-FLM671 only

* The pictured model is KX-FLM671.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

Using surge protectors

The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (

If the unit shares a single telephone line with a DSL
service (KX-FLM671 only)

Fax transmission/reception may be unreliable, noise
interference may be heard during telephone
conversations, or Caller ID (page 46) may not function
properly. Please attach a DSL filter (

) to the telephone

line cord of the unit to prevent this. A DSL filter may be
available from your DSL service provider.

* The pictured model is KX-FLM671.

Using network router/network hub

We recommend using network routers/network hubs
(

) under secure network environments. Consult

your network administrator for firewall settings, etc.

The warranty does not cover damage due to security
problems or any inconveniences relating to it.

Power cord

Connect to a power outlet
(120 V, 60 Hz).

Telephone line cord

Connect to a single telephone line jack (RJ11C).

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the protective
sheet if attached.

Answering machine (not supplied)

LAN interface connector

Remove the protective sheet if attached.

Network router/Network hub (not supplied)

Also connect networked computers.

To the Internet

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (Category 5 (Cat-5)
Ethernet cable).

IMPORTANT NOTICE FOR THE USB
CONNECTION

DO NOT CONNECT THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 23).

Summary of Contents for KX-FLM661





























































































Search results

Summary of Contents for KX-FLM661

Reviews:

Related manuals for KX-FLM661

Brands by name

Popular brands

Panasonic KX-FLM661, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM661

Reviews:

Related manuals for KX-FLM661

Brands by name

Popular brands