Panasonic KX-FLM653HK Operating Instructions Manual Download

Page: 17 / 86

1. Introduction and Installation

1.7 Paper stacker

Line up the slots (

) in the paper stacker with

the pegs (

) on the bottom of the unit, then

insert the two tabs of the paper stacker into the
slots on the unit (

Note:

Do not place the unit in an area where the
paper stacker may be easily bumped into.

Document and recording paper will be
ejected from the front of the unit. Do not place
anything in front of the unit.

The paper stacker can hold up to
approximately 100 sheets of printed paper.
Remove the printed paper before the paper
stacker becomes full.

1.8 Document stacker

Pull the document stacker (

) forward gently

until it clicks into place, then press the centre
part of the document stacker (

) to open the

extender (

FLM653HK-PFQX2345ZA-en.book Page 15 Tuesday, November 22, 2005 4:39 PM

Summary of Contents for KX-FLM653HK























































































Search results

Summary of Contents for KX-FLM653HK

Reviews:

Related manuals for KX-FLM653HK

Brands by name

Popular brands

Panasonic KX-FLM653HK, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM653HK

Reviews:

Related manuals for KX-FLM653HK

Brands by name

Popular brands