manualshive.com logo in svg

Panasonic KX-FLM653FX, Operating Instructions Manual, Page: 17 / 86

Share
Download
Panasonic KX-FLM653FX Operating Instructions Manual Download Page 17

1. Introduction and Installation

15

1.7 Paper stacker

Line up the slots (

1

) in the paper stacker with 

the pegs (

2

) on the bottom of the unit, then 

insert the two tabs of the paper stacker into the 
slots on the unit (

3

).

Note:

L

Do not place the unit in an area where the 
paper stacker may be easily bumped into.

L

Document and recording paper will be 
ejected from the front of the unit. Do not place 
anything in front of the unit.

L

The paper stacker can hold up to 
approximately 100 sheets of printed paper. 
Remove the printed paper before the paper 
stacker becomes full.

1.8 Document stacker

Pull the document stacker (

1

) forward gently 

until it clicks into place, then press the centre 
part of the document stacker (

2

) to open the 

extender (

3

).

2

1

3

2

1

3

FLM653FX-PFQX2394ZA-en.book  Page 15  Thursday, November 24, 2005  4:57 PM

Summary of Contents for KX-FLM653FX























































































Reviews:

No comments