Panasonic KX-FLB883FX Operating Instructions Manual Download Page 87

Page: 87 / 108

12. Paper Jams

Case 3:
When the recording paper has jammed near the
output tray:

Pull and hold the lever (

) to release the jammed

paper.

Remove the jammed paper (

) carefully by pulling it

upwards.

Close the top cover until locked.

12.1.2 When the recording paper is not fed
into the unit properly

The display will show the following.

CHECK PICK UP

INPUT TRAY #1

Pull the paper input tray completely out, then remove
the recording paper and straighten it.

Re-load the recording paper.

Insert the paper input tray into the unit.

Note:

If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 17 for details.

FLB883FX-PFQX2770ZA-OI-en.book Page 87 Wednesday, September 26, 2007 10:41 AM

Summary of Contents for KX-FLB883FX













































































































Search results

Summary of Contents for KX-FLB883FX

Reviews:

Related manuals for KX-FLB883FX

Brands by name

Popular brands

Panasonic KX-FLB883FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB883FX

Reviews:

Related manuals for KX-FLB883FX

Brands by name

Popular brands