Panasonic KX-FLB756 Operating Instructions Manual Download Page 65

Page: 65 / 92

Features Summary

Code

Feature & Display

Settings

How the unit operates

You can confirm the status of the
other party’s machine.

●

If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.

●

The connecting tone volume
cannot be adjusted.

#76

Setting the connecting tone

If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.

CONNECTING TONE
MODE=ON

[±]

OFF

#68

Setting the Error Correction
Mode (ECM)

To send a fax even if there is static
interference on the telephone line.

ECM SELECTION
MODE=ON

[±]

OFF

This feature is available when the
transmitting/receiving stations are
ECM compatible.

#80

Resetting advanced features to
their default settings

SET DEFAULT
RESET=NO

[±]

YES

Follow steps 1 and 2 above.

Press

to select “YES”.

Press

again.

Press

(The default setting is in bold type.)

#79

Saving on toner consumption

TONER SAVE
MODE=OFF

[±]

OFF

“ON”: The toner cartridge will last
longer.

●

This feature may lower the print
quality.

How to set menu options

Advanced features

(cont.)

Note:

●

Step 3 may be slightly different depending on the
feature.

●

See page 60 for more details.

Press

(

)

until the following is

displayed:

then press

and press

(

)

until the desired feature is displayed.

ADVANCED MODE

PRESS SET

Press

until the desired setting is

displayed.

Press

Programming table (cont.)

KX-FLB756 (060-065) 03.4.14 9:16 PM Page 65

Summary of Contents for KX-FLB756





























































































Search results

Summary of Contents for KX-FLB756

Reviews:

Related manuals for KX-FLB756

Brands by name

Popular brands

Panasonic KX-FLB756, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB756

Reviews:

Related manuals for KX-FLB756

Brands by name

Popular brands