6. Programmable Features
39
“
ON
” (default): The unit will fit received
documents onto your recording paper.
“
OFF
”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[
±
]
“
NORMAL
” (default): For normal contrast.
“
DARKER
”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON
[
±
]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
L
This code is also used to receive a voice
message and a fax in the same call (page
33).
1.
Press
{
MENU
}
.
2.
Press
{#}
, then
{
4
}{
1
}
.
3.
Press
{A}
or
{B}
repeatedly to select “
ON
”.
4.
Press
{
SET
}
.
5.
Enter your code from 2 to 4 digits, using 0–9,
{*}
and
{#}
.
L
The default code is “
;
#9
”.
L
Do not enter “0000”.
6.
Press
{
SET
}
.
7.
Press
{
MENU
}
.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON
[
±
]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“
ON
” (default): You will hear a beeping sound.
“
OFF
”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON
[
±
]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“
ON
” (default): You do not have to press
{
FAX
START
}
for fax reception.
“
OFF
”: You have to press
{
FAX START
}
for fax
reception.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON
[
±
]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“
ON
” (default): To send a fax even if there is static
interference on the telephone line.
“
OFF
”: Deactivates this feature.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON
[
±
]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
L
If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
“
ON
” (default): You will hear connecting tones.
“
OFF
”: Deactivates this feature.
Code #79: Setting toner save feature
TONER SAVE
=OFF
[
±
]
“
ON
”: The toner cartridge will last longer.
“
OFF
” (default): Deactivates this feature.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO
[
±
]
To reset the advanced features:
1.
Press
{
MENU
}
.
2.
Press
{#}
, then
{
8
}{
0
}
.
3.
Press
{A}
or
{B}
repeatedly to select “
YES
”.
4.
Press
{
SET
}
.
5.
Press
{
SET
}
again.
6.
Press
{
MENU
}
.
FL511E.book Page 39 Monday, June 30, 2003 5:55 PM
