10. Multi-unit Operation
58
10 Multi-unit Operation
Additional Units
10.1 Operating additional
cordless handsets
Up to 6 cordless handsets can be registered to a
single base unit. Additional cordless handset will
allow you to have an intercom call with another
cordless handset. See page 5 for accessory
information.
10.2 Registering a
cordless handset to a base
unit
The cordless handset supplied with the base unit
is already registered. If an optional cordless
handset is purchased, it must be registered
using the following method.
1
Base unit:
Press and hold
{
INTERCOM
}
for about 3
seconds, until the registration tone sounds.
L
After pressing
{
INTERCOM
}
, the rest of
this procedure must be completed within
1 minute.
2
Cordless phone:
Press
{
MENU/SET
}
.
L
“
Program
”
will be displayed.
3
Press
{e}
or
{v}
repeatedly to display
“
Register handset
”
.
4
Press
{
MENU/SET
}
.
Note:
L
When the cordless handset has been
registered successfully, a confirmation tone
will be heard and handset number will be
displayed.
10.2.1 Canceling a cordless
handset
If you no longer need to use the handset or if you
want to use the handset with a different base
unit, it is necessary to cancel the handset’s
registration from the current base unit. Only one
handset can be canceled at a time.
1
Base unit:
Press
{
MENU
}
, then
{
INTERCOM
}
.
L
“
DEREGISTRATION
”
will be displayed.
2
Press
{
SET
}
.
3
Press the desired handset number you want
to cancel (
{
1
}
to
{
6
}
).
L
A beep will sound and the registration
memory will be erased on the base unit
only.
4
Cordless handset:
L
Disconnect the battery (page 6) from the
cordless handset for 10 seconds, then
reconnect it.
Note:
L
After canceling registration, the handset
cannot be used. If you want to use it again,
re-register the handset to the base unit.
{
INTERCOM
}
{
MENU
}
{
SET
}
{e}{v}
{
MENU/SET
}
FC971CX-PFQX2269ZA-en.book Page 58 Friday, August 5, 2005 8:29 AM
