Panasonic KX-FC971CX-S, Service Manual, Page: 49 / 220

Code Function Set Value Effective
Range
Default Remarks
595 Receive error limit check 1: 5%
2: 10%
3: 15%
4: 20% 1~4 2 ----------
596 Transmit level set X dBm -15~00 -10 Selects the FAX transmission level. Refer to
Sometime there is a transmit problem (P.72)and
Receive Problem (P.73).
598 Receiving sensitivity 43= -43 dBm 20~48 42 Used when there is an error problem. Refer to The
unit can copy, but cannot transmit/receive(P.74).
710 Memory clear except History data Refer to Memory Clear Specification(P.49).
717 Transmit speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
transmission. Refer to Sometime there is a transmit
problem (P.72)and The unit can copy, but cannot
transmit/receive(P.74).
718 Receive speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
reception. Refer to Receive Problem(P.73) and The
unit can copy, but cannot transmit/receive (P.74).
722 Redial tone detect 1:ON 2:OFF 1, 2 1 ----------
731 CPC mode X 10 msec 1~255 036 Sets the CPC signal detection mode from the
converter.
745 Power ON film feed 1:ON 2:OFF 1,2 1 Invalid function for thermal model.
763 CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tone of friendly reception.
771 T1 timer 1:35 sec
2:60 sec 1, 2 2 Sets a higher value when the response from the other
party needs more time during FAX transmission.
774 T4 timer X 100 msec 00~99 00 Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
784 Voice prompt test See TEST FUNCTIONS(P.50).
815 Sensor & Vox check See TEST FUNCTIONS(P.50).
852 Print test pattern See TEST FUNCTIONS (P.50).
853 Top margin 1~9 10 ----------
874 DTMF on time X 10 msec 6~20 10 ----------
875 DTMF off time X 10 msec 6~20 10 ----------
880 History list ----------
881 Journal 2 list See Special service journal reports (P.88).
882 Journal 3 list See Special service journal reports (P.88).
7.3.4. Memory Clear Specification
*
1
Execute Service Mode #550 when you want to reset the all setting data keeping the user information.
*
2
Execute Service Mode #710 to clear the user information in case that Main Unit is recycled.
Note:
Please restart a power supply after clearing a memory.
49
KX-FC971CX-S / KX-FGA521CX-S