manualshive.com logo in svg

Panasonic KX-FC966FX, Operating Instructions Manual

Share
Download
Panasonic KX-FC966FX Operating Instructions Manual Download Page 55

11. Help

55

11.2 Error messages – Base unit display

If the unit detects a problem, one or more of the following messages will appear on the display.

Display

Cause & Solution

“

BUSY

”

L

The cordless handset you tried to call is in use.

L

The cordless handset you are calling is too far from the base unit.

“

CALL SERVICE

”

L

There is something wrong with the unit. Contact our service personnel.

“

CHECK DOCUMENT

”

L

The document was not fed into the unit properly. Re-insert the document. If 
misfeeding occurs frequently, clean the document feeder rollers (page 64) 
and try again.

L

The document is longer than 600 mm. Press 

{

STOP

}

 to remove the 

document. Divide the document into two or more sheets and try again.

“

COVER OPEN

”

“

CHECK PAPER

”

L

The cover is open. Close it and press 

{

FAX/START

}

 to clear the message.

L

The unit has run out of recording paper. Install recording paper (page 7) and 
press 

{

FAX/START

}

 to clear the message.

“

FAX IN MEMORY

”

L

See the other displayed message instructions to print out the document.
Received documents are stored in memory due to a lack of recording paper 
or a recording paper jam. Install paper (page 7) or remove the jammed 
paper (page 63). You will lose all faxes in memory if the power is removed. 
Check with power connected.

“

FAX MEMORY FULL

”

L

The memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 7) or remove the jammed 
paper (page 63). You will lose all faxes in memory if the power is removed. 
Check with power connected.

L

When performing memory transmission, the document being stored 
exceeded the memory capacity of the unit. Send the entire document 
manually.

“

MEMORY FULL

”

L

The base unit’s phonebook memory is full. Erase unnecessary items (page 
21).

“

MESSAGE FULL

”

L

There is no room left in memory to record voice messages. Erase 
unnecessary messages (page 36, 37).

“

MODEM ERROR

”

L

There is something wrong with the unit’s modem. Contact our service 
personnel.

“

NO FAX REPLY

”

L

The other party’s fax machine is busy or has run out of recording paper. Try 
again.

“

PAPER JAMMED

”

L

A recording paper jam occurred. Remove the jammed paper (page 63).

“

PLEASE WAIT

”

L

The unit is checking and initializing the paper cutter. Wait for a moment 
while the check is completed.

“

POLLING ERROR

”

L

The other party’s fax machine does not support polling. Check with the 
other party.

“

RECORDING ERROR

”

L

The greeting message you recorded was under 1 second long. Record a 
longer message.

“

REDIAL TIME OUT

”

L

The other party’s fax machine is busy or has run out of recording paper. Try 
again.

“

REMOVE DOCUMENT

”

L

The document is jammed. Remove the jammed document (page 63).

L

Press 

{

STOP

}

 to eject the jammed paper.

“

SERIAL ERROR

”

L

There is something wrong with the unit. Contact our service personnel.

FC966FX-PFQX2677ZA-en.book  Page 55  Tuesday, November 14, 2006  9:03 AM

Summary of Contents for KX-FC966FX









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands