7. Programmable Features
55
7.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 18).
1.
"
i
N
i
#
2. “
Time Settings
”
i
#
3. “
Alarm
”
i
#
2 times
4.
Select an alarm mode.
i
#
5.
Enter the desired hour and minute.
i
#
6.
Select the desired ringtone.
i
#
7. “
Save
”
i
#
i
{ih}
L
When the alarm is set,
e
is displayed.
Note:
L
To stop the alarm, press any dial key.
L
When in talk or intercom mode, the alarm will not
sound until the call has ended.
L
If you select
“
Once
”
, the setting will change to
“
Off
”
after the alarm sounds.
7.2.3 Display Setup
Display language
1.
{ih}
i
"
i
N
i
#
2. “
Display Setup
”
.
i
#
3. “
Select Language
”
.
i
#
4.
Select the desired language.
i
#
i
{ih}
Note:
L
If you select a language you cannot read, press
{ih}
,
"
, press
{V}
, press
#
, press
{V}
2
times, press
#
, press
{V}
3 times, press
#
,
select the desired language, then press
#
. Press
{ih}
.
7.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
1.
"
i
L
i
#
2. “
Call Options
”
i
#
3. “
Call Restrict
”
i
#
4.
Enter
“
0000
”
(default base unit PIN).
L
If you forget your PIN, contact our service
personnel.
5. To restrict the base unit,
press
{
0
}
.
To restrict a cordless handset,
press the desired
cordless handset number.
L
All the registered cordless handset numbers will
be displayed.
L
Flashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
L
To turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
6.
#
7.
Select a memory location.
i
#
8.
Enter the phone number or area code to be restricted
(up to 8 digits).
i
#
i
{ih}
L
To erase a restricted number, press
{
C/
T
}
.
“
Off
”
Turns alarm OFF. Press
#
again,
then press
{ih}
to finish.
“
Once
”
The alarm sounds once at the set time.
Enter the desired day and month.
“
Daily
”
An alarm sounds daily at the set time.
FC258FX-PFQX2635ZA-en.book Page 55 Wednesday, June 14, 2006 10:05 AM
