Panasonic KX-A145 Series, Service Manual

Page: 70 / 97

Address Default Name Country
Setting
Type Description
09F2 00 HsRegInfo.EmcFlags x D Handset registration info - EMC flags
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
09F3 21 RingMode x D Ring mode. Modes used in KAMMA4 are 20h and 21h.
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
27.3.3. Flash Time setting
Address Default Name Country
Setting
Type Description
0F0B 08 CalibBreakTime[0] 0A D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 80 ms
0F0C 14 CalibBreakTime[1] 46 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 200 ms
0F0D 46 CalibBreakTime[2] 14 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 700 ms
27.3.4. Clip (Caller ID) configuration
Address Default Name Country
Setting
Type Description
0F1C 70 Detect 74 D CLIP detect configuration
Bit
0-2: Mode: 0: Learn mode, 1: DTMF only, 2: FSK
only, 3: Generic mode, 4: Russian CLIP only
3: Unused4
4: Onhook: 1=enable 0=disable
5: Offhookk: 1=enable 0=disable
6: Msgwaiting: 1=enable 0=disable
7: Unused7
0F37..38 3D 01 Parse.Configuration 3D 00 D Clip parse set configuration
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: ProtocolPriority:
If 2 mutually exclusive parameters occurs, the 1st in
the protocol message has priority.
1=enable 0=disable
9: UseCallType:
Verify the Call Type parameter, if available, when
receiving Call Back CLIP at busy subscriber.
1=enable 0=disable
10: AddTop0IfNo0
Automatic addition of 0 if top of Caller ID is not 0.
1=enable 0=disable
11: DtmfDigitsOnly
Parse DTMF clip without start and/or stop code.
1=enable 0=disable
12..15: Reserved12..Reserved15
0F3D 00 Rcid.Mode x D RCID mode
Bit
0: answer-mode,
1=auto-answer, 0=manual answer
1..4: 0
5: detect length,
1=enable(development only), 0=disable
6: add category,
1=enable(development only), 0=disable
7: 0
70
KX-TCD450RUM / KX-A145RUM / KX-TCD450R UT / KX-A145RUT