Address
Default
Name
Country
Setting
Type
Description
0F4B
03
Config1
x
D
BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled,
1: ClipDetectionSettingEnabled,
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled,
disabled
6: SMSPabxSupportSettingEnabled,
disabled
7: ARSDisablePossible, disabled
0F4C
D7
Config2
07
D
BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled, enabled
5: ARSIntDeletionMenuEnabled,
6: ARSMultipleCarrierMenuEnabled,
enabled
7: ARSMultipleAreaCodeMenuEnabled,
enabled
0F4E
FF
Config2
x
D
BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled, enabled
1: CallRestrictionMenuEnabled,
2: CancelHandsetMenuEnabled,
3: BaseToneMenusEnabled, enabled
4: ARSMenuEnabled, enabled
5: CallCostMenuEnabled, enabled
6: BasePINMenuEnabled, enabled
7: DialModeMenuEnabled, enabled
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe the layout of the EEPROM (IC2) for the KX-A143
Handset.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
66
Summary of Contents for KX-A143EXB
