KW1M-H Eco-POWER METER
34
<Guide for data capacity (1-day: 24 hours)>
File type 1
About 4kB
File type 2
About 2kB
File type 3
About 210kB (Log cycle: 1 min)
*Recordable data capacity is depend on the SD memory card.
If there is no space to write, it will not write data after that and error is shown on the display.
<Notice>
Be sure to insert the direction of SD memory card correctly.
When it is inserted wrong direction, the unit or memory card may be
damaged. Do not move the inserted memory card, or the unit or memory
card may be damaged. Do not insert an unsupported memory card.
After writing data and removing SD memory card, insert a dummy card to
protect in order to avoid dust or something else.
<Display during writing>
‘SD ACCESS’ is displayed during writing.
After completing the writing, shift to monitor display.
When there isn’t enough capacity in SD memory card or SD memory card is unwritable, error display
will appear alternately.
During writing
Display of writing error
<Notice>
During ‘SD ACCESS’ is displayed, do not remove the memory card.
It may cause damage of data in memory card or damage of memory card or stop working.
In addition, during writing, it may not be able to measure nor communicate.
5.4.3 Unit memory
During measurement, measuring data is saved in the unit memory.
However, when it reaches the maximum capacity, the older data will be overwritten.
You can initialize the unit memory. (Refer to Mode 4.)
Alternately
