80
3.25 Border Removal
This function removes the black borders, formed during scanning or copying, from
around the images.
IMPORTANT NOTES:
•
Set the reference plate and flatbed sheet to black when using the Border Removal
function (refer to
Changing the Reference Plate Setting
in the Operating
Instructions).
•
Depending on the images to be scanned, the function may not work satisfactorily.
•
If there are dark areas at the periphery of a document, these areas may be
removed as well.
•
The function may not work properly if there is any foreign matter on the reference
plate or flatbed sheet when documents are scanned by the scanner. In a case like
this, clean the reference plate or flatbed sheet.
ISIS configuration method
1
Set the [Border Removal] check box in the [Basic Image] section of the
[Advanced Settings] dialog box to on.
Before Border Removal
After Border Removal
S7065C
SS905C
