Panasonic KV-S6050W, Service Manual

Page: 81 / 267

Classified
Code
Error
Code
Possible Cause Check Point
U34
22 00 00 00 U34 Error Code does not turn off even
through the Back Door is closed.
1. The connector to the Back Door Detector is loosen.
2. The Back Door Detector is broken.
1. Connect the cables properly.
2. Replace the sensor board.
U35
25 00 00 00 U35 Error Code does not turn off even
through the Document Cover is closed.
1. The connector to the Document Cover Sensor is
loosen.
2. The Flat-Bed Door Detector is broken.
1. Connect the cables properly.
2. Replace the sensor board.
F40
30 xx 00 00 The Hopper Home Sensor does not
operate properly.
1. The connector to the HOPPER POSITION DETECTOR
Board is not properly inserted.
2. The Hopper Home Detector is broken.
1. Mount the connector properly.
2. Replace the HOPPER POSITION DETECTOR
F50
|
F78
40
|
4F
00
|
00
00
|
00
00
|
00
1. Paper dust on the sensor section.
2. LED or sensor is laid down.
3. LED has reached the end of its useful life. 1. Clean the sensor section.
2. Straighten the LED or sensor.
3. Replace the LED.
F10
80 00 00 00
1. Program ROM is not correctly mounted.
2. Download has failed. 1. Remount ROM correctly.
2. (1) Download again.
(2) Replace the Program ROM or the MAIN CONTROL
Board.
F11
81 xx xx xx Poor soldering around the Work RAM
(IC1029, IC1030) on the MAIN CONTROL
Board. (ST2: DATA) (ST3, 4: Address)
Replace the MAIN CONTROL Board.
F15
85 00 00 00 Download to Imprinter has failed.
1. Replace the IMPRINTER Board.
2. Confirm the cable connected to IMPRINTER
3. Confirm MAIN CONTROL Board Imprinter I/F
F17
87 00 00 00 Poor soldering around the SD-RAM
(IC604, IC605) on the SCSI Board.
Replace the SCSI Board.
F18
88 00 00 00 Additional DIMM is not mounted
correctly.
Remount the DIMM.
F19
89 00 00 00
F20
8A xx xx xx Shading RAM Error
Replace the MAIN CONTROL Board.
F21
8B xx xx xx Line RAM Error
Replace the MAIN CONTROL Board.
F26
90 xx xx xx Patch RAM Error
Replace the MAIN CONTROL Board.
F28
92 xx xx xx Rotation RAM Error
Replace the MAIN CONTROL Board.
F29
93 xx xx xx Front Gamma RAM Error
Replace the MAIN CONTROL Board.
F30
94 xx xx xx Back Gamma RAM Error
Replace the MAIN CONTROL Board.
F31
95 xx xx xx Dither RAM Error
Replace the MAIN CONTROL Board.
F34
98 xx xx xx EEPROM RAM Error
Replace the MAIN CONTROL Board.
F36
9A xx xx xx GA Sensor Error
Replace the MAIN CONTROL Board.
F37
9B xx xx xx GA Image Error
Replace the MAIN CONTROL Board
SCSI Board.
(Note)
If neither LCD indication nor memory accessed from CPU work properly, when initializing, LED6
81