About LED
The status of the scanner is displayed by the LED (Green) (
C
) and the LED (Red) (
D
), as shown in the
table below:
C
LED (
Green
)
D
LED (
Red
)
Status
OFF
OFF
Power OFF
ON
OFF
Ready mode or Scanning
Blinking (Slow)
OFF
OFF
ON
Error
Blinking (Fast)
OFF
Warming up
Blinking (Fast, 2 times consecutively)
OFF
Double Feed Skip mode
Blinking (Fast, 3 times consecutively)
OFF
Dog-ear Detection Skip mode
*1
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off feature, and change
the time until the scanner turns off in User Utility.
*2
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press the
Start/Stop button of the scanner to return to ready mode. The time until the scanner enters sleep mode can be changed in User
Utility.
*3
14
Operating Manual
Location of Controls