background image

Introduction

Thank you for purchasing a Panasonic High Speed Color Scanner.

Feature Highlights

Superior Paper Feeding

This scanner features an advanced paper-feeding mechanism that adjusts the pressure of the rollers and
the amount of time that the rollers are applied to the document according to the condition of the document.
As a result, this scanner can scan a wide range of paper weights, from very thin 20 

g

/m² (5 lbs.) paper to

very thick 157 

g

/m² (42 lbs.) paper.

High-speed Double Sided Scanning

This scanner can scan documents at high speed, regardless of the image type (monochrome / color).
Single sided: 90 pages/minute, double sided: 180 images/minute (200 dpi)
Single sided: 60 pages/minute, double sided: 120 images/minute (300 dpi)
* Speeds based on scanning A4 size paper in landscape orientation.

Support for High-efficiency Scanning Jobs

Self-cleaning function
This scanner contains an ionizer that, by emitting ions, reduces the amount of paper dust that accumulates
on the scanning glass. This scanner also has self-cleaning brushes that clean paper dust off of the scanner
glass.

Stapled document detection
This scanner has a stapled document detection function that detects documents that contain staples and
stops scanning before any serious damage occurs.

Double feed detection
This scanner contains ultrasonic sensors that detect double feeding. Double feeding can be detected even
if you scan documents that contain paper of various thicknesses.

Double Feed Skip (DFS) function
If scanning has been stopped because a double feed was detected, you can easily resume scanning by
pressing the Double Feed Skip key (DFS key). When you scan documents that include items that you do
not want to be detected as double feeding (for example, documents that have receipts attached, envelopes,
etc.), the double feed detection function can be enabled and still scan these documents.

Other Features

You can set the left and right document guides independently. By doing so, you can reliably scan
documents of differing paper sizes.

The paper feed path can be opened widely to easily removed jammed paper and perform maintenance.

2

Operating Manual

Introduction

Summary of Contents for KV-S5055C




























































































Reviews: