3.
Remove dirt on the sensors with the included blower (
1
), then wipe the image sensor covers with the
roller cleaning paper (page 48).
How to clean the sensors and reflectors
Remove the brush from the blower (
1
), place it on the holes for the sensors and reflectors (
2
), as well
as the conveyor indentations (
2
), and blow off dirt, as shown in the illustration below.
1
2
Location of Sensors
5
4
4
3
6
7
3
Waiting sensor
4
Skew sensors
5
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
6
Starting sensor
7
Image sensor cover (B)
9
10
8
8
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
9
Paper sensor
10
Image sensor cover (F)
Operating Manual
55
Care and Maintenance
