9
Rev.1.0
[1]
Microphone opening
This opening picks up the speaker’s voice.
[2]
Microphone selection indicator (green) [OWN]
Lights when [OWN] (audio from [1], [8], or [13]) is selected for adjusting the volume.
Blinking indicates that the microphone is muted.
[3]
Microphone selection indicator (green) [OTHER]
[OTHER] microphone refers to other microphone receiving audio at the same receiver.
Lights when the [OTHER] microphone is selected for adjusting the volume.
[4]
Line selection indicator (green) [LINE]
[LINE] refers to external devices connected to the line input terminal of the receiver. Lights
when [LINE] is selected for adjusting the volume.
[5]
Volume control buttons
Adjust the volume of [OWN], [OTHER] and [LINE]. (Adjustment step range: refer to
Receiver[K-SRC14] manual ) Adjust when any one of the indicators in [2] to [4] is on.
Pressing the
button will increase the volume.
Pressing the
button will decrease the volume.
Keeping the buttons pressed will continuous increase/decrease the volume.
[6]
Microphone input terminal [MIC IN] (side)
Transmits the audio from a connected external microphone to the receiver.
When an external microphone is connected to this terminal, the audio from the [1]
Microphone opening is muted.
[7]
Charge indicator (red) [CHG]
Indicates the charging status.
ON:
Charging completed .
OFF:
, No connected a charge connector or no battery installed.
Blinking (
2 seconds ) : Charging
*
In the case of a complete discharge state, the first about 1 minute red
LED lights
RED.
Blinking(
1 second ) : Charge Error
