15
Rev.1.0
Adjusting the volume
The microphone can control the volume of audio signals that are output from the receiver
(K-SRC14).
After adjusting the volume level at the receiver and any connected external devices, the
speaker can make fine adjustments, such as level differences, by performing the following
operations on the microphone.
1 Press the selector button
When the selector button is pressed for the first time after turning on the power, the [OWN]
selection indicator lights, and after that the selection indicator for the preceding selection
([OWN], [OTHER], [LINE]) will light. Then press the selector button repeatedly to select the
desired selection. The selection indicators light in the following order:
[OWN] ->
[OTHER] ->
[LINE] ->
[OWN].
* The selection indicator lights for 5 seconds. If no operation takes place within this period,
the indicator turns off automatically.
2 Press the volume button
While the selection indicator for the selection made in 1 is lit, either press the volume button
or keep it pressed.
will increase the volume, pressing
will decrease
Pressing the volume button
it. Refer to the receiver manual for an adjustment range. The selection indicator goes off 5
seconds after the volume button was pressed for the last time.
• When [OWN] is lit
Adjust the audio volume of this microphone (input from the microphone opening, external
BATT
CHG
OWN
OTHER
LINE
PWR
MUTE
SELECT
INT/E1
Selection indicator
1
Selector button
2
Volume button
