15
Rev.1.1
DIP switch setting
switch
No
Name
Function
On
Off
Switch1
1 Microphone Override
Selection of microphone override function
Activated*
Deactivated
2 Tone On/Off
Selection of tone signal from this unit at
operating volume button of K-STD14
Tone ON*
Tone OFF
3 Tone Level High/Low
Selection of tone signal (2 levels) at operating
volume button
High level
Low level*
4 Microphone/Line Mixing
Selection of whether to mix the microphones MIC1
and MIC2 to the mixing output (Line Out)
Mixing
activated*
Mixing deactivated
5 Feedback Blocker setting
Selection of feedback blocker function
Feedback
blocker
activated
Feedback blocker
deactivated*
6 Remote Volume setting
Selection of remote volume function, normal mic
buttons or reassigned When this switch is set to
ON, the volume control of this unit using the
volume button of K-STD14 will be deactivated.
This setting is intended for the control of an
external device using the volume button of
K-STD14 through the serial communication
command.
Mic buttons
reassigned
Mic buttons
normal*
(as labeled)
7 Mix Out Attenuator setting
Attenuation of audio output of the mixing
output (–10 dB)
ATT effective* ATT deactivated
8
Transmission output
control
Selection of transmission output control
HIGH
Normal*
Switch2
1
unused
-
-
2
3
4
5
6
7
8
It must needs "OFF"
-
on
Off*
*default setting
Note:
The settings of this switch are updated at the time of turning on the power.
Settings changed while powered up are not updated until the power is turned off and then back on. (Excluding No.7 of DIP
Switch 1)
Default setting
Switch1
Switch2
