Panasonic K-SRC14, Manual

Page: 27 / 34

27
Rev.1.1
Command List
Command Content Type 1st parameter 2nd parameter Command example
QPW
Query about this
unit power state
Query None None $QPW[CR][LF]
Response 1: POWER ON None $QPW:1[CR][LF]
CCS
Notification of
microphone power
state
Change
notification 1: MIC1 input
2: MIC2 input 0: MIC OFF
1: MIC ON
$CCS:1:1[CR][LF]
QCS
Query about
microphone power
state
Query
1: MIC1 input
2: MIC2 input
None $QCS:1[CR][LF]
Response Same as above
0: MIC OFF
1: MIC ON
$QCS:1:0[CR][LF]
SVL Volume setting
Setting
1: MIC1 input
2: MIC2 input
L: LINE input * Refer to
“ Volume list ”
(page 32).
$SVL:L:00[CR][LF]
Response Same as above Same as above $SVL:L:00[CR][LF]
SVU Volume 1-step up
Setting
1: MIC1 input
2: MIC2 input
L: LINE input
None $SVU:1[CR][LF]
Response Same as above None $SVU:1[CR][LF]
SVD
Volume 1-step
down
Setting
1: MIC1 input
2: MIC2 input
L: LINE input
None $SVD:2[CR][LF]
Response Same as above None $SVD:2[CR][LF]
QVL Volume query
Query
1: MIC1 input
2: MIC2 input
L: LINE input
None $QVL:1[CR][LF]
Response Same as above
* Refer to
“Volume
list” (page 32).
$QVL:1:01[CR][LF]
SMT
Mute individual
setting
Setting
1: MIC1 output
2: MIC2 output
M: MIX output
0: MUTE OFF
1: MUTE ON
$SMT:1:0[CR][LF]
Response Same as above Same as above $SMT:1:0[CR][LF]
QMT Mute state query
Query
1: MIC1 output
2: MIC2 output
M: MIX output
Same as above $QMT:M[CR][LF]
Response Same as above
0: MUTE OFF
1: MUTE ON
$QMT:M:0[CR][LF]
SAM Mute collective setting
Setting
0: MUTE OFF
1: MUTE ON
None $SAM:1[CR][LF]
Response Same as above None $SAM:1[CR][LF]
CPM
Notification of
page mute state Change
notification 0:PAGE MUTE OFF
1:PAGE MUTE ON
None $CPM:1[CR][LF]
QPM
Query about page
mute state
Query None None $QPM[CR][LF]
Response
0:PAGE MUTE OFF
1:PAGE MUTE ON
$QPM:0[CR][LF]
C F 1 Notification of E1sta
Change
notification
None None $C F 1[CR][LF]
C F 2
Notification of E2
state
* 3-time transmission
at 1 sec.
interval
Change
notification
0: Non E2 status
1: E2 status & E2 ACK
signal not received
2: E2 status & E2 ACK
signal received
None $C F 2:1[CR][LF]
C F 2
Query about E2
state
Query None None $Q F 2[CR][LF]
Response
0: Non E2 status
1: E2 status & E2 ACK
signal not received
2: E2 status & E2 ACK
signal received
None $Q F 2:2[CR][LF]
SDS
Microphone
Override setting
Setting 1: Microphone Override
0: Disable
1: Enable
$SDS:1:0[CR][LF]
Response Same as above Same as above $SDS:1:0[CR][LF]