RTSP Port The default value is 554. RTSP stream query format is:
Main stream:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0
Sub stream:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=1
You need to input the following four items manually.
username/password/IP and port.
The IP is device IP and the port default value is 554. You can leave it in
blank if it is the default value.
Follow standard RTP protocol and when encode mode is MJPEG, the max
resolution only supports 2040*2040.
HTTPs
Set to enable HTTPS protocol.
HTTPs
Port
The default value is 443. You can input the actual port number if
necessary.
PPPoE
3.3.3
The PPPoE interface is shown as in Figure 3-13.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from
the IP address column. When PPPoE is on, please disable UPnP to avoid influence on dial-up.
Please note, you need to go to the IP address item to via the device current device information.
You can access the client-end via this address.
34
Summary of Contents for K-EW114L01E
Page 9: ...Figure 2 5 6...
Page 24: ...Figure 3 6 Figure 3 7 1 21...
Page 51: ...See Figure 3 24 Figure 3 24 See Figure 3 25 48...
