15
How to attach the Option parts
<How to set a Wearable Case >
1)
Put the printer in a wearable case.
2)
Pass the belt attachment through the strap pin of the printer.
3)
Pass it through the hole of a wearable case
4)
Fix the belt attachment by the stopper.
5)
Fix the belt attachment of the other side by the same way.
2)
3)
Both belt attachments were installed.
1)
<NOTE>
The belt attachment is the following. It is 2 pieces attached to a wearable case.
4)
Stopper
Other side
5)