![background image](http://html.mh-extra.com/html/panasonic/jt-h200pr-series/jt-h200pr-series_operating-instructions-manual_275201009.webp)
9
3. Appendix
■
■
■
■
Troubleshooting
Symptom
Possible Cause
Action
No Power in Printer
1.Has the battery fully inserted?
2.Is the Power Switch on?
1.Charge the battery pack.
2.Move the Power Switch on.
Nothing is printed
1.Is the power turned on?
2.Is the paper set correctly?
3.Are the LED signals lighting red?
4.Is the LED blinking red?
5. Are you using Bluetooth?
6.Are you using IrDA?
1.Turn on power.
2.Check the print paper setting.
3.Charge the battery.
4.Make sure that the paper is
setting properly, or close the
paper cover completely.
5.Reduce the distance of the
device and the printer.
6. Adjust the angle of IrDA,
or clean up the window,
or avoid direct sunlight.
The print is faint
1.Isn’t the thermal head dirty?
2.Are you using the recommended
paper?
1.Clean it up.
2.Check the paper.
The orange or red
LED is lighting
even after
charging battery.
The life cycle of the battery pack
may have expired.
Replace the battery pack with a
new one.
■
■
■
■
How to care
How to clean up the thermal head and the rubber roller.
1) Push the paper cover lever to open the paper cover.
2) Wipe off any dust/dirt using the cotton swab with a small amount of alcohol (ethanol).
(Do not use thinner, benzene series or kerosene series.)
3) Close the cover after alcohol volatilizes.
Rubber roller
Thermal head
Summary of Contents for JT-H200PR Series
Page 37: ...37 EN GE ...
Page 38: ...38 IT FR ...