Setup
19
NOTE:
For Windows XP
•
If the Found New Hardware Wizard window is displayed
during restarting Windows after installing the printer
driver, perform the following instructions.
(1) Select
Install the software automatically
[Recommended]
in the Found New Hardware
Wizard window and click
[Next >]
.
(2) Select
Printer Driver
and click
[Next >]
.
(3) Click
[Continue Anyway]
.
(4) Click
[OK]
.
The Files Needed window is displayed.
(5) Click
[Browse...]
and select
PCL
folder [D (CD-ROM drive letter):\WinXP \
ENGLISH \ PCL or
PS
folder [D (CD-ROM drive letter):\WinXP \
ENGLISH \ PS].
(6) Follow the instructions on the screen.
When you connect the printer and the computer using a
USB interface cable, turn off the printer to avoid the Plug
and Play installation.
1
Start Windows.
2
Quit all applications.
3
Insert the printer CD-ROM disk into the CD-ROM
drive.
4
Exit the
Panasonic
Setup
window to setup the USB
port first.
5
Turn the printer
on
(see “Power On” on page 29).
The
Wizard
window appears. Go to the following
step depending on the operating system.
- step 6-A for Windows 98.
- step 6-B for Windows Me.
- step 6-C for Windows 2000.
- step 6-D for Windows XP.
NOTE:
•
When using the printer and other USB device
simultaneously, we cannot guarantee normal printing.
•
For Windows 98 and Windows Me, restarting of the
computer may be required.
6-A
(For Windows 98)
(1) Click
[Next>]
.
(2) Click on the
Search for the best driver for your
device
[Recommended]
check button and click
[Next>]
.
(3) Click on the
Specify a location
check box, then click
[Browse...]
.
(4) Select
Win98
folder [D (CD-ROM drive
letter):\Usb\Win98], then click
[OK]
.
(5) Click
[Next>]
until
[Finish]
window is displayed.
(6) Click
[Finish]
.
(7) Click
[Next>]
.
(8) Click on the
Search for the best driver for your
device [Recommended]
check button and click
[Next>]
.
(9) Click on the
Specify a location
check box, then click
[Browse...]
.
(10) Select
Pcl
folder [D (CD-ROM drive
letter):\Win9x\English\Pcl] or
Ps
folder [D (CD-ROM
drive letter):\Win9x\English\Ps], then click
[OK]
.
(11) Click
[Next>]
.
(12) Click
[Next>]
.
(13) Follow the instructions on the screen.
(14) Proceed to step
7
on page 21.
When using the USB Interface Cable
(for Windows 98 / Windows Me / Windows
2000 / Windows XP):
Set
u
p
