![Panasonic inverter NN-ST450W Operating Instructions & Cook Book Download Page 18](http://html.mh-extra.com/html/panasonic/inverter-nn-st450w/inverter-nn-st450w_operating-instructions-and-cook-book_272343018.webp)
16
Using the Delay/Stand Feature
The Delay/Stand Pad is used as a timing pad either before, during or after a cooking program. When the Delay/Stand Pad is selected with a time,
there is no microwave power in the oven during this time.
1.
To Set a Standing Time:
Press the Delay Pad
Set Delay time (9 hours) (10
min. pad is inoperable) An “
H
”
will appear in the display to
denote hours. The minute pad
enters hours and the sec pads
enter the minutes.
Set the complete cooking
program, by entering power
level and time required.
Press Start Pad. Delayed time
will count down then the
cooking program will start.
Set the desired
Cooking Program, by
selecting power level and time
required.
Then Press the Stand Pad.
Set desired standing time (9
hours) (10 min. pad is
inoperable) An “
H
” will appear
in the display to denote hours.
The minute pad enters hours
and the sec pads enter the
minutes.
Press Start Pad. Cooking
program will commence after
which the standing time will
count down.
2.
To Set a Delay Start:
Notes
1.
If the oven door is opened during the stand or delay time, the time in the display window will continue to count down.
2.
Delay Start cannot be used before an Auto Program.
3.
If the Delay Stand pad is pressed four times, this will turn off the auto guide system. “Operation guide off” will appear once. The words will not
now scroll in the display window. To turn the auto guide back on, press the Delay/Stand pad four times. “Operation guide on” will appear, and
then the words will scroll again.
Turbo Reheat
This will provide an added boost of microwave power up to 1000 watts, for the initial part of the cooking time, when reheating foods e.g. soup,
baked beans.
Press the Pad.
Select Cooking time.
Press Start.
Turbo Reheat
Micro Power
Micro Power
Set desired standing time (9
hours 59 minutes) (10 min. pad
is inoperable) An “
H
” will appear
in the display to denote hours.
The minute pad enters hours
and the sec pads enter the
minutes.
Set Delay time (9 hours 59
minutes) (10 min. pad is
inoperable) An “
H
” will appear in
the display to denote hours. The
minute pad enters hours and
the sec pads enter the minutes.
IP2932_39T20BP_Eng_00_100129.pdf16 16
IP2932_39T20BP_Eng_00_100129.pdf16 16
2010-1-29 10:17:42
2010-1-29 10:17:42