13
Control Panels
6
3
1
2
AUTO COOK
5
4
NN-ST450W / NN-ST460M*
(1)
Display Window
(2)
Time Pads
(3)
Auto Weight Microwave Programs
(4)
Auto Weight Defrost Programs
(5)
Microwave Power Setting
(6)
Turbo Reheat Pad
(7)
Delay/Stand Pad:
This can be used to delay a cooking program for up to 9 hrs
and 59 mins, or used to time or for standing (non-cooking)
time.
(8)
Clock Pad:
Press the clock pad. Using the minute and second pads set
the clock (24 hr clock). Press clock pad again to stop colons
flashing.
(9)
lb/oz Conversion Pad
(10)
Weight Selection Pads
(11)
Stop/Cancel Pad:
Before Cooking:
one press clears your instructions.
During Cooking:
one press temporarily stops the cooking program. Another
press cancels all your instructions and the time of day or
colon will appear in the display.
(12)
Start Pad:
Press to start operating the oven. If during cooking the door is
opened or Stop/Cancel Pad is pressed once, Start Pad has to
be pressed again to continue cooking.
(1)
(2)
(11)
(12)
(8)
(10)
(9)
(5)
(7)
(3)
(4)
Beep Sound:
A beep sounds when a pad is pressed. If this beep does not sound,
the setting is incorrect. When the oven changes from one function
to another, two beeps sound. After completion of cooking, five
beeps sound.
(6)
* The design of your control panel may vary from the panel
displayed (depending on colour), but the words on the pads
will be the same.
This oven is equipped with an energy saving function.
Please Note
1.
When in stand-by mode the brightness of the display will be
reduced.
2.
The oven will enter stand-by mode, when first plugged in and
immediately after the last operation has completed.
If an operation is set and Start Pad is not pressed,
after 6 minutes, the oven will automatically cancel
the operation. This display will revert back to clock
or colon mode.
IP2932_39T20BP_Eng_00_100129.pdf13 13
IP2932_39T20BP_Eng_00_100129.pdf13 13
2010-1-29 10:17:42
2010-1-29 10:17:42