38
x
Adjust the angular field of view and the focus.
Adjust the angular field of view in accordance with the distance between the camera lens and a
photographic subject. These adjustments shall be performed together with the camera angle
adjustment.
q
Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro-
priate angle of view.
Note:
• The focus may not be adjusted appropriately when the zoom ring is positioned at the "W" (or
"T") end. In this case, adjust the focus again by slightly moving the zoom ring to the direction of
"T" (or "W").
w
To adjust the angular field of view with a higher zooming effect even after rotating the zoom ring
almost fully in the "T" direction, hold down the auto focus (AF) button/extra optical zoom button
for 5 seconds or more. 2x extra optical zoom will be applied. When the image capture size
under "VGA" is applied, the zoom factor can be adjusted up to 2x without deterioration of
image quality. When holding down the auto focus (AF) button/extra optical zoom button again
for 5 seconds or more, 1x extra optical zoom will be applied.
e
Tighten the zoom lock knob.
r
When the auto focus (AF) button is pressed, the auto focus (AF) indicator will light for around
10 seconds, and the focus is automatically adjusted.
FOCUS ADJUSTMENT
LOW
HIGH
.......
|
............
INDICATOR 775
BEST
PEAK HOLD 780
FOCUS
MONITOR
OUT
HEATER
SD CARD
/ AF
AF/EXTRA
OPTICAL
ZOOM
INITIAL
SET
TOP
Zoom lock knob
Zoom ring
Focus ring
* Do not move the focus ring.
Auto focus (AF) button/
Extra optical zoom button
Loosen
Tighten
Summary of Contents for i-Pro WV-SW355
Page 50: ...50 ...
