Explanation:
A DID call reaches a VM (DPT) group directly or by the Intercept Routing feature. According to the [DID
Programming Example] and [VPS Programming—Programming Example of Trunk Group Assignment], a
caller will hear a corresponding company greeting of the VPS.
Time mode (day/lunch/break/night) of the preprogrammed tenant is applied to the DID destination and
company greeting number.
PBX
Tenant 1
123-4567
(Company A)
Tenant 3
(Company B)
Trunk Call
Extn. 105
Extn. 102
VPS
(Floating Extn. No. 500)
Intercept
123-2468
Trunk Call
Sends the following information:
·
VM Trunk Group: 1
·
Time mode: Day
Sends the following information:
·
VM Trunk Group: 2
·
Time mode: Night
8.
Caller’s Identification Notification to the VPS
When receiving a trunk call, the PBX sends the caller’s identification number/name to the VPS.
9.
DID Number Notification to the VPS
When receiving a trunk call with a DDI/DID number or an MSN, the PBX sends the DDI/DID number or
MSN to the VPS. The number will be sent to the VPS even if the call reaches the VPS after redirection by,
for example, the Intercept Routing feature.
10.
Status Notification to the VPS
After the call is redirected by the VPS, the PBX sends the status of the redirected extension (e.g., busy)
to the VPS.
11.
Paging by the VPS
The VPS can perform the Paging feature using the recorded message. (
®
12.
Live Call Screening (LCS)
A PT or PS user can monitor his own mailbox while a caller is leaving a message and, if desired, answer
the call by pressing the LCS button. When the caller is leaving a message in the mailbox, monitoring can
be carried out in two ways: each PT user can choose which through personal programming (Live Call
Screening Mode Set). PS users cannot choose the way: only Private mode is available for them.
Hands-free mode:
The user can monitor the call automatically through the built-in speaker.
Private mode:
The user will hear a warning tone. To monitor the call, the user goes off-hook with the
handset, MONITOR button, or SP-PHONE button. However, PS users cannot monitor the call with the
speakerphone.
®
6.1 [4-1-1] Wired Extension—Extension Settings—Option 4—
Feature Guide
281
1.24.3 Voice Mail DPT (Digital) Integration
Summary of Contents for HYBRID IP-PBX KX-TDA200
