27
(ENG) SQT0885
Recording with this unit
Record images with this unit.
≥
You can record images even when this unit is not connected to a smartphone.
1
Press the recording mode/Wi-Fi button to switch to the desired
recording mode.
≥
The recording mode changes each time you press the button. The recording
mode lamps will light (or flash).
Motion Picture Recording Mode
#
Slow Motion Recording Mode
#
Still Picture
Recording Mode
*1 You need to set [Recording Mode] of the “Image App” to [Loop Recording].
*2 You need to select a setting other than [OFF] for [Interval rec mode] of the “Image App”.
2
Press the recording start/stop button.
In Motion Picture Recording Mode/Slow Motion Recording Mode:
The access lamp will light red and recording will start.
≥
If you press the recording start/stop button again, the recording will
stop. While data is being recorded, the access lamp will flash. Do not
remove the microSD card until the access lamp goes off.
In Still Picture Recording Mode:
Recording still pictures.
≥
In [Interval rec mode], the access lamp will light red and recording will
start. If you press the recording start/stop button again, the recording
will stop.
Please refer to the operating instructions (PDF format) for details.
Recording Mode
Recording mode
lamp
Recording method
Motion Picture
Recording Mode
Lit
[Normal Shooting]:
Recording motion pictures.
Flashing
[Loop Recording]
*1
:
No matter how long you record, you can only
record motion pictures for the last 1 hour to
microSD card.
Slow Motion Recording
Mode
Lit
[Slow Motion]:
This records motion pictures in slow motion by
setting a high frame rate (increasing the number
of frames).
Still Picture Recording
Mode
Lit
Normal still picture recording:
Recording a still picture.
Flashing
[Interval rec mode]
*2
:
This is for recording still pictures at a set interval.
A
Access lamp
HX-A1M-SQT0885_mst.book 27 ページ ２０１５年６月１日 月曜日 午前９時５８分
