3
In order to prevent accidents or injuries to the users, other people, and damage to
property, please follow the instructions below.
ڦ
The following charts indicate the degree of damage caused by wrong operation.
ڦ
The symbols are classifi ed and explained as follows.
Safety Precautions
Make sure to follow these instructions
WARNING
Indicate
serious injury
or death.
CAUTION
Indicate risk of
injury or property
damage.
These symbols indicate
prohibition.
This symbol indicates requirement
that must be followed.
WARNING
Stop using the product when any
abnormality/failure occurs and
turn ‘OFF’ the isolating switch or
remove power plug if fi tted.
(Risk of smoke/fi re/electric shock)
Example of abnormality/failure:
• Abnormal noise or heat.
• Abnormal emission of smoke, fi re.
• The product sometimes does not start
when turned on.
• The power is sometimes disconnected
when the cord is moved.
• Burnt odour or abnormal noise is
detected during operation.
• The body is deformed or abnormally
hot.
• The Oven door is cracked.
Contact a Panasonic Authorised
Service Centre immediately for
maintenance/repair.
The oven must be earthed. Plug
the power cord to socket outlet
with earthing continuity terminal.
Improper grounding could cause
electric shock.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualifi ed persons in order
to avoid a hazard.
Ensure that the appliance is
switched OFF before replacing the
lamp to avoid the possibility of
electric shock.
When disconnecting the Power
Plug, hold the plug itself. Do not
pull the cord in anyway. The cord
may be damaged and may cause
fi re or electric shock.
The means for disconnection must
be incorporated in the fi xed wiring
in accordance with the wiring
rules.
This appliance is necessary to
allow disconnection from the
supply after installation. The
disconnection may be achieved
by having the plug accessible or
by incorporating a switch in the
fi xed wiring in accordance with the
wiring rules.
Be sure to disconnect the Power
Plug from the wall outlet or switch
OFF the external switch before
maintenance, repair or service.
Also, do not handle the Power Plug
or external switch with wet hand.
