Panasonic HL-CX672B Operating And Installation Instructions Download

Page: 37 / 40

Installation Instructions

For Installer

Positioning the Oven

CAUTION

Installing the oven with the help of a second person is recommended.

The base on which the oven is resting must be completed as shown in below

illustration.

Never exert pressure on the handle during installation into the cabinet.

1. Take note of general dimensions required for the installation.

The figure below shows the general dimensions of the oven.

566

595

596

560

Unit: mm

Flush fit and Proud fit.

For the best integration within a kitchen, install this oven in a standard 600 mm wide

cabinet that gives a flush fit with the surrounding cabinet fronts. A recess of 25 mm is

ideal. It can also be installed using a proud fit with the surrounding cabinet.

Flush fit (top view)

Proud fit (top view)

Unit: mm

Infill panel recessed 25 mm from external

cabinet / door to accommodate for a flush fit.

B: Cabinet door.

A: Cabinet door.

Summary of Contents for HL-CX672B









































Search results

Summary of Contents for HL-CX672B

Reviews:

Related manuals for HL-CX672B

Brands by name

Popular brands

Panasonic HL-CX672B, Operating And Installation Instructions

Search results

Summary of Contents for HL-CX672B

Reviews:

Related manuals for HL-CX672B

Brands by name

Popular brands