14
6 Test Mode
6.1. Oven testing procedure
The procedure starts with the oven not connected to the mains, and can be activated only within 30sec from oven connection.
During the test the electronic board also checks the temperature probe connection. In case of an open circuit or a short circuit
D1 displays “Err1”; the test stops. If the result is positive, nothing is shown on the display and the test continues.
At the beginning of testing procedure the door lock is activated. It’s complete activation is evidenced by locked door and
Icon
visibile on display
STATUS
DISPLAY SHOWS
KEYS USE
Connect OVEN
to power
D1 shows 00:00 flashing
D2 is OFF
Keys
and
flashing
Clock setting
Keep pressed for 5sec to enter in Testing procedure
TESTING
start
All segments, icons and keys are ON
Door lock activates, buzzer ON
Press to go ahead with testing procedure
TESTING
Steps
D1 shows “COLL”
D2 shows “P0”
MTG max speed activated, Oven lamp ON
D1 shows “COLL”
D2 shows “P1”
MTG min speed a ctivated, Oven lamp OFF, opening the door the
oven lamp gets ON
D1 shows “COLL”
D2 shows “P2”
Turnspit ON (if available)
D1 shows “COLL”
D2 shows “P3”
Internal Fan ON
D1 shows “COLL”
D2 shows “P4”
Grill element ON
D1 shows “COLL”
D2 shows “P5”
Bottom element ON
D1 shows “COLL”
D2 shows “P6”
Circular element ON
D1 shows “COLL”
D2 shows “P7”
Top element ON
D1 shows “COLL”
D2 shows “P8”
Exit from test