5.5 Zero Set Function
■
Overview
This function is used to forcibly set the measured value to "zero".
You can use this function to adjust to the reference zero point when the sensor has been
replaced or when the workpiece has been changed.
When the zero set is set, the measured value at the location where the setting is executed is
set to zero.
Depending on where the zero set is set, the display value for the sensing location changes.
5.5.1 Zero Set Setting
1.
Simultaneously hold down the UP key and DOWN key for 3 seconds.
"0" is displayed on the digital display and, when the keys are released, “0” flashes three
times to indicate that the setting has been completed.
When the zero set setting is enabled, the zero set indicator lights up.
5.5 Zero Set Function
5-10
WUME-HGF1UM-2
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email [email protected]