55
VQT1J42
Recording
This allows recording of the pictures and sound
to start approximately 3 seconds before the
recording start/stop button is pressed so you can
capture moments you would otherwise have
missed.
¬
When the mode dial is set to
and
an SD card is inserted in this unit.
1
Open the LCD monitor or extend
the viewfinder.
2
Press the PRE-REC button.
The
indication appears.
≥
Aim this unit at the subject and position it
securely.
≥
Recording of the pictures and sound starts
approximately 3 seconds before the recording
start/stop button is pressed.
3
Press the recording start/stop
button to start recording.
≥
There is no beep sound.
≥
After recording starts, the PRE-REC setting is
canceled.
To end PRE-REC
≥
PRE-REC is also ended if you press the
PRE-REC button in PRE-REC.
≥
PRE-REC is canceled in the following cases.
j
If you operate the mode dial.
j
If you turn the unit off.
j
If you open the card slot cover.
j
If you press the MENU button.
j
In quick start standby mode.
≥
When the remaining time left for recording
motion pictures is less than 1 minute,
PRE-REC cannot be set.
≥
If you start recording less than 3 seconds after
pressing the PRE-REC button, the PRE-REC
function is not activated and the pictures are
recorded normally.
≥
When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
PRE-REC function
This prevents you missing a shot.
VIDEO
VQT1J42ENG.book 55 ページ ２００７年７月２０日 金曜日 午前１０時３６分