94
VQT1N45
5
Press the MENU button to
display the PictBridge menus.
6
Select the date print setting on
[DATE PRINT].
≥
If the printer is not capable of date printing, this
setting is unavailable.
7
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4
k
5 INCH]:
L size
[5
k
7 INCH]:
2L size
[4
k
6 INCH]:
Postcard size
[A4]:
A4 size
≥
You cannot set paper sizes not supported on
the printer.
8
Select the desired layout setting
on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[
]:
No frame print
[
]:
Frame print
≥
You cannot set page layouts not supported on
the printer.
9
Select [PRINT]
#
[YES] and
press the cursor button to print
the pictures.
≥
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
When you stop printing halfway
Move the cursor button down.
≥
A confirmation message appears. If [YES] is selected,
the number of prints set is canceled and the screen
returns to step 3. If [NO] is selected, all the settings are
kept and the screen returns to step 3.
≥
Avoid the following operations during printing.
These operations disable proper printing.
j
Disconnecting the USB cable
j
Opening the SD card cover and removing
the SD card
j
Switching the mode switch
j
Turn the unit off
≥
Check the settings for the paper size, print
quality etc. on the printer.
≥
The print quality varies with paper size.
≥
The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
≥
When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not
use a USB hub.
MENU
HDCSD9P-VQT1N45_ENG.book 94 ページ ２００７年１２月２６日 水曜日 午後５時５７分
