35
VQT3K06
This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is
reopened.
≥
/
Quick start will not work if there is no SD card inserted.
≥
Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥
Change the mode to
.
1
Set [QUICK START] to [ON].
2
Close the LCD monitor while the mode is set to
.
The status indicator
A
flashes green and the unit goes
into quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit
is put into recording pause.
≥
When in quick start standby mode about 60% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start standby mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
It may take some time for automatic white balance to adjust.
≥
In the quick start mode, the zoom magnification becomes 1
k
.
≥
If [ECONOMY] (
l
34) is set to [5 MINUTES] and the unit automatically goes into quick
start standby mode, close the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
Start and stop of recording and unit on/off can be confirmed with this sound.
(Volume low)/
(Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
l
93)
[QUICK START]
[OFF]/[ON]
[ALERT SOUND]
[OFF]/
/
HDC-SD40&TM40EB-VQT3K06_mst.book 35 ページ ２０１１年２月８日 火曜日 午後６時８分